Siemens ET8 LMP1 Series, Instruction Manual, Page: 5 / 16

Getting to know your appliance
en
5
*
Getting to know your
appliance
Getting to know your appliance
The instruction manual is the same for various different
hobs. You can find the hob dimensions in the overview
of models.
~
Page 2
The control panel
Notes
■
Depending on the operating condition of the hob the
controls which can currently be selected light up
brightly or dimmed. If you touch them, the relevant
function is activated.
■
The controls which cannot currently be selected do
not light up.
■
The settings of the hotplates currently selected light
up brightly.
■
Always keep the controls dry. Moisture reduces their
effectiveness.
■
Do not pull pans close to the displays and sensors.
The electronics could overheat.
The hotplates
Notes
■
Any dark areas in the glow pattern of the hotplate
are due to technical reasons. The function of the
hotplate is not affected.
■
Hotplate temperature is regulated by the heat
switching on and off.The heat may also switch on
and off at the highest setting.
This ensures e.g.:
– sensitive components are protected from
overheating
– the appliance is protected from electrical
overload
– better cooking results are achieved
■
With multi-circuit hotplates the heater elements of the
inner filament circuits and the heater element of the
activations may switch on and off at different times.
Í
E E
q
Í Í
Display
‚ - Š
Heat settings
• / œ
Residual heat
›
PowerBoost function
–
Keep warm function
‰‰
Timer
Controls
#
Main switch
b PowerBoost function
¢
Hotplate selection
$
Childproof lock
Wipe protection
0IIIIIIIIIIIII Control panel*
ð
Activating the dual-circuit hotplate
ˆ
Activating the small cooking zone
Ô
Activating the extended cooking zone
è
Keep-warm function
0
Timer
‰
Stopwatch function
*The middle hotplate is adjusted on the right-hand control panel
Hotplate Activating and deactivating
$
Single-circuit hot-
plate
ð
Dual-circuit hotplate Touch the
ð symbol
When the hotplate is activated: the corresponding indicator lights up