Siemens ER94331HK, Installation And Operation Instruction Manual, Page: 24 / 32

21
Change the timer
Should you need to change the timer, press and hold the option
button for 3 seconds. Afterwards, use the or button to
change the timer. Once completed, the and button will
be locked automatically in 5 seconds, the countdown will start then.
Example: Changing the left burner from 10 minutes to 20
minutes, the middle burner from 20 minutes to 30 minutes, and
the right burner from 80minutes to 30 minutes.
1) Press and hold, the left burner symbol should flash on
display.
2) Press and hold the button, the display will change from
to quickly.
3) Press once again to choose the middle burner, the middle
symbol will flash on display.
4) Press and hold the button, the display will change from
to quickly.
5) Press the once again to choose the right burner, the right
symbol will flash on display.
6) Press and hold the button, the display will change from
to quickly.
7) Once completed, the and will be locked automatically
in 5 seconds, the display will show and start countdown.
The cooking time has elapsed
The burner will switch off automatically. A signal sounds every
2 seconds within the 1 minute interval and will flash on
display. After the signal, other burners’ remaining time will show
on display. Press any button to cancel the sound.
Ending timer manually
Press and hold the option button for 3 seconds. Select the timer
which you want to end the timer and use the or to turn
the timer to ‘00min’, otherwise you can press and at the
same time for over 5 seconds to switch off timer for the burner.
Checking the remaining time on each burner
If more than 1 burner has set the timer, the remaining timer
for each burner in operation will be shown one by one. This
mean if the left and middle burner is operate in timer mode. The
remaining time for the left burner will be shown and follow by the
middle burner. Whichever burner has a line underneath the flame
meaning the remaining time showing on timer is representing
that particular burner.
Each time you move the pan away for a short time, turner the
burner to the small-flame position or off. Even when you do other
operations near the hob this is a good rule of thumb. Turning the
flame down will also reduce the risk of burning, save gas, and
reduce pollution.
When you use a big stove, ensure there is a distance of at least
25mm between the stove and the surrounding combustible
materials.
Gas burner operation