background image

In the event of a malfunction, turn off the appliance’s gas and 
electricity supply. For repairs, call our Technical Assistance 
Service.

If one of the controls will not turn, do not force it. Call the 
Technical Assistance Service immediately, so that they can 
repair or replace it.

Never place unstable pans on the hob or the burners, as 
they may accidentally tip over.

Do not clean the hob using a steam cleaner. Risk of 

electrocution!

This appliance design and manufactured according to 
GB16410-2007 standard for gas appliances: built-in 
appliance.

Do not store or use corrosive chemicals, steamers, 

flammable materials or non-food products below or near this 

domestic appliance.

This appliance is not intended for use by persons (including 
children) with reduced physical, sensory or mental 
capabilities, or lack of experience and knowledge, unless 
they have been given supervision or instruction concerning 
use of the appliance by a person responsible for their safety.

Never let children play with the appliance.

Never leave the appliance unattended during operation.

The graphics in this instruction manual are given as a guide 
only.

The manufacturer is exempt from all responsibility if   the 
requirements of this manual are not complied.

The first ignition (or ignition after it has been left unused for a 
long time) may be difficult, as there is residual air in the gas 
pipeline, it may be difficult to light the burner. 

Safety precautions

5

Summary of Contents for ER74232HK





























Reviews:

Related manuals for ER74232HK