Siemens ER74232HK, Installation And Operation Instruction Manual

Page: 5 / 28

All the packaging material are environmental friendly and
recyclable. When you are disposing of these packaging
materials, please do so in such a way that protects the
environment and minimizes waste.
Do not allow children to play with the thin film or packaging
case to avoid suffocation or accidents.
The old hob should be taken to a recycling center where it
can be disposed of in a way which protects the environment.
Old hobs contain useful materials that can be recycled.
Discarded old electrical appliances can be hazardous to the
environment.
Read these instructions carefully. Reading these instructions
will enable you to use your appliance safely and effectively.
Use approved gas tubing bearing EMSD approval
marking (such as :
機電工程署批准
EMSD APPROVAL
GTXXXX) for connection to appliances, or other
appropriate methods accepted by EMSD.
HK Town Gas connection
The operating pressure of this gas hob is 15mbar, therefore
no governor is required.
Attention! According to the Gas Safety Regulations of
Hong Kong, any gas installation works including the
installation of appliances and connection tubing, must
be undertaken by registered gas installers who are
registered for that appropriate classes and be employed
by registered gas contractors.
When installing built-in gas hob on top of stove cabinet,
please check that there is provision for ventilation at the
cabinet to ensure proper operation of the gas hob.
Do not store any flammable materials, sprays or
pressurized containers inside the stove cabinet.
Safety precautions
Packaging of the new hob
Disposal of the old hob
Safety precautions
2
Nam
eplat
e