Siemens ER 15353, Operating Instructions Manual

Page: 13 / 137

H
P0
P0
%
+
< >
< >
Your hob has a protection system for the electronic
of the timer.
H
Where there is high temperature in the electronic of
the timer, the message and the information of the set
times are alternatively displayed, and the burners will
stay switched on. If the temperature drops down to an
acceptable level, the message disappears. If the
temperature reaches the maximum allowed limit, the
H
timer switches off all the burners of your appliance as
a safety action, the message and the remaining
time of the set burners which have been switched
off are alternatively displayed. The controls are
blocked until the temperature drops down to an
acceptable level. Wait a few minutes and use again
your appliance.
If there is a power cut, as a safety action, the set
burners are switched off.
As soon as the electricity is restored, the message
is displayed. In order to use again the timer,
touch any of the symbols, the display will go out
and your hob will be reeady to be set.
The message is also displayed the first time
the appliance is plugged in. In order to use again
the timer, touch any of the symbols, the display will
go out and your hob will be ready to be set.
Protection against
excess temperatures
Protection against
power supply failure