Siemens ER 15353, Operating Instructions Manual

Page: 12 / 137

00
W
W
0
+
1
< >
When the duration
has elapsed
When the duration has elapsed, the burner switches
off, a signal sounds for 30 seconds,
is shown on
the right of the display and on the left
the dots will
rotate.
Touch any symbol. The display goes out and the
audible signal ceases.
TURN THE CONTROL KNOB TO THE "0" POSITION
FOR THE BURNERS WHICH HAVE BEEN
SWITCHED OFF BY THE TIMER.
duration
Touch the symbol , select the burner and change
the time using the symbol < or > whithin next 5 seconds.
The new time begins to count down after a few seconds.
Cancelling
prematurely
Touch the symbol , select the burner and change
the time to
00
using the symbol < or >. The indicator
disappears after a few seconds or if another timer is
set, the timer with the shortest time is displayed.
The timer function is no longer active after a power cut.
You can set duration up to 99 minutes.
If you would like to call up the remaining duration of the
W
set times, touching the symbol you will see them.
Timer button lock
.
Then the display will show the following message
˜–
programme information again. If any symbol is touched
when this function is being used, a whistle will sound
and
˜–
will appear on the display.
A whistle will sound and the display will show the
To deactivate the button lock, press the
0
symbol
again for at least 4 seconds.
Press and hold the
0
symbol for at least 4 seconds.