Siemens EQ.500 S700, User Manual

Page: 34 / 85

en Cleaning and servicing
34
3.
Use and to select "Descale"
and press ⁠.
4.
To start the programme, press ⁠.
a
The display will guide you through
the programme.
5.
Empty and insert the drip tray.
6.
Remove and empty the milk con-
tainer.
7.
Clean the milk container, milk tube
and suction pipe.
8.
Fit the components and insert the
milk container.
9.
If there is a water filter, remove it.
10.
Press ⁠.
11.
Empty the water tank.
12.
Fill a container with 0.5 l lukewarm
water.
13.
Add a Siemens descaling tablet to
the water and stir until the tablet is
fully dissolved.
14.
Pour the descaling solution into the
water tank up to the calc mark and
press ⁠.
15.
Place the empty container under the
outlet system and press ⁠.
a
The descaling programme will run
for approx. 20 minutes.
16.
Rinse the water tank.
17.
Press ⁠.
18.
If there is a water filter, insert the wa-
ter filter.
→ "Insert water filter", Page 22
19.
Press ⁠.
20.
Fill the tank with fresh water up to
the "max" mark.
21.
Press ⁠.
a
The descaling programme takes ap-
prox. 1 minute and rinses the appli-
ance.
22.
Empty and insert the drip tray.
23.
Remove and empty the milk con-
tainer.
24.
Clean the milk container, milk tube
and suction pipe.
25.
Fit the components and insert the
milk container.
a
The program has ended and the ap-
pliance is ready for operation.
Using the cleaning programme
Run the cleaning programme when
your appliance prompts you. The pro-
cess takes approx. 9 minutes.
Requirement: The brewing unit is
cleaned.
→ "Cleaning brewing unit", Page 32
1.
Press ⁠.
2.
Use and to select "Cleaning
and care" and press ⁠.
3.
Use and to select "Clean"
and press ⁠.
4.
To start the programme, press ⁠.
a
The display will guide you through
the programme.
5.
Empty and insert the drip tray.
6.
Open the ground coffee compart-
ment.
7.
Place one Siemens cleaning tablet
into the ground coffee compartment.
8.
Close the ground coffee compart-
ment and press ⁠.
9.
Place a container with a capacity of
min. 0.5 l under the outlet system
and press ⁠.
a
The cleaning programme takes ap-
prox. 7 minutes.
10.
Empty and insert the drip tray.
a
The program has ended and the ap-
pliance is ready for operation.
Using calc'nClean
You can combine the cleaning and de-
scaling programmes using the
calc'nClean service programme. Run
the calc'nClean programme when your
appliance prompts you. The process
takes approx. 43 minutes.
Requirement: The brewing unit is
cleaned.
→ "Cleaning brewing unit", Page 32