en
Basic settings
10
10.1 Locked hob
If you set a cooking zone while the hob is locked, the
following happens:
¡
flashes in the cooking zone display or the residual
heat indicator flashes alternately with .
¡
The display above the symbol lights up.
Switch the cooking zone off. Deactivate the lock.
11 Basic settings
You can configure the basic settings for your appliance to meet your needs.
11.1 Overview of the basic settings
Display
Setting
Value
Childproof lock
- Manual.
1
Automatic.
– Switched off.
Audible signals
– Confirmation and fault signals are switched off.
– Only the fault signal is switched on.
– Only the confirmation signal is switched on.
– All signal tones are switched on
1
.
Automatic switch-off of the cooking zones.
– switched off.
1
- - minutes until the appliance switches off auto-
matically.
Duration of the timer end signal tone
– 10 seconds
1
– 30 seconds
- 1 minute
Cookware test
You can use this function to test the quality
of the cookware.
- Not suitable.
- Not optimal.
- Suitable.
Restoring factory settings
- Individual settings
1
.
- Factory settings.
1
Factory setting
11.2 To go to the basic settings
Requirement:
The hob must be switched off.
1.
Select the power level on the front-left cooking
zone.
2.
Within the next 10 seconds, press and hold for
four seconds.
Product information
Display
Directory for the technical after-sales
service (TK)
Production number
Production number 1
.
Production number 2
.
a
The first four displays provide the product informa-
tion. Touch or to view the individual displays.
3.
Touch to access the basic settings.
a
and light up alternately as well as as a preset
value.
4.
Touch repeatedly until the desired setting ap-
pears.
5.
Use or to select the required value.
6.
Touch and hold for four seconds.
a
The settings are saved.
11.3 Exiting the basic settings
▶
Turn all of the switches to position 0.
12 Cookware test
The quality of the cookware has a major influence on
the speed and the result of the cooking process.
You can use this function to test the quality of the cook-
ware.
Before the test, ensure that the size of the cookware
base corresponds to the size of the cooking zone be-
ing used.
Access is via the basic settings. →
Summary of Contents for EM CSB Series
Page 15: ......
