206_58300000105199_ara_en_h – 15.03.a
Seite 24 von 66
4.10 Touch Control YL147 (KOMFORT)
In induction cooktops, only the sensor and display board of the TC is
used. The power supply is obtained from the induction modules.
The TC board communicates with the induction electronics boards by
serial communications based on LIN protocol (Local Interconnect
Network). The connection is made by a 4-wire cable.
There is another connection for the technical service connector.
Cooktops with touch control have the control zone marked on the
glass surface. The capacitive sensors are located underneath these
indicators.
Sensors, from left to right, in the YL 147-35 (4i BO/SI) and YL 147-
73 (4i polibox BO/SI) models:
►
Main switch (on, off, lock)
►
Memory function sensor
►
More and less, zone 1
►
More and less, zone 2
►
Activation sensor for timer function
►
More and less, zone 3
►
More and less, zone 4
Sensors, from left to right, in the YL 147-31 (4i Ba) model:
►
Main switch (on, off, lock)
►
More and less, zone 1
►
More and less, zone 2
►
Activation sensor for timer function
►
More and less, zone 3
►
More and less, zone 4
►
Memory function sensor
Sensors, from left to right, in the YL 147-30 (2i Ba) model:
►
Main switch (on, off, lock)
►
Dual burner expansion
►
More and less, zone 1
►
More and less, zone 2
►
Activation sensor for timer function
►
More and less, zone 3
►
More and less, zone 4
►
Memory function sensor
