manualshive.com logo in svg

Siemens DOME COLOUR CFMC1315-LP, Configuration

Share
Download
Siemens DOME COLOUR CFMC1315-LP Configuration Download Page 37

Configuration

37

Building Technologies 

 

CFMC1315-LP Configuration Manual EN

Fire Safety & Security Products 

 

05/05/2009

9.4.1

 

Alarm 

For usage of external alarm inputs you need to define the following parameters: 
1.

 

Select Alarm > Alarm. 

2.

 

Configure the options as described in the tables below. 

3.

 

Click Save. 

 

Alarm Input 

ON: Detects an external alarm. 

OFF: Does not perform alarm detection. 

Digital Input 
Mode 

Alarm Input: Detects an external alarm. 

OFF: Does not perform alarm detection. 

 

Input Type 

NO (Normally Opened): An alarm will be triggered when the external 
contact closes. 

NC (Normally Closed): An alarm will be triggered when the external 
contact opens. 

Text Enable 

Define whether an alarm text will be overlaid on the video image. 

Text 

Define a text for the alarm message. Max. 24 characters can be 
entered. 

Audio Output 

When set to ON, an audio alarm message can be sent to an external 
speaker. 

NOTE: A speaker with integrated amplifier must be connected to the 
AUDIO out jack on the rear panel. 

Event 

Select the pre-recorded sound file (on the SD card) to be output as a 
sound alarm. See page [

J

 39] . 

 

Summary of Contents for DOME COLOUR CFMC1315-LP

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands