background image

Operating modes

 en

5

Switch the appliance off when you are not using it.

¡

The appliance does not consume any energy.

Switch off the lighting if you no longer require it.

¡

The lighting does not consume any energy.

Clean or replace the filters at regular intervals.

¡

The effectiveness of the appliance is increased.

Put the cooking lid on.

¡

The cooking vapours and condensation are re-
duced.

4  Operating modes

4.1 Air extraction mode

The air which is drawn in is cleaned by the grease fil-
ters and conveyed to the exterior by a pipe system.

The air must not be discharged into a
flue that is used for exhausting fumes
from appliances burning gas or other
fuels (not applicable to appliances that
only discharge the air back into the
room).

¡

If the exhaust air is to be conveyed
into a non-functioning smoke or ex-
haust gas flue, you must obtain the
consent of the heating engineer re-
sponsible.

¡

If the exhaust air is conveyed
through the external wall, a tele-
scopic duct should be used.

4.2 Air recirculation mode

The air which is drawn in is cleaned by the grease fil-
ters and an odour filter, and conveyed back into the
room.

To bind odours in circulating-air mode,
you must install an odour filter. The dif-
ferent options for operating the appli-
ance in circulating-air mode can be
found in our catalogue. Alternatively,
ask your dealer. The required accessor-
ies are available from specialist retail-
ers, from customer service or from the
Online Shop.

Summary of Contents for D46ML54N1B

















Reviews: