Siemens CVMS2025-IR Configuration Download Page 27

Page: 27 / 71

Configuration

Compression

Siemens AG

A6V10334045

22.12.2011

Resolution

Configure the resolution. The higher the resolution the larger the image file.

Possible settings：SVGA, VGA, QVGA (when PC/VGA Resolution is selected)

D1, 2CIF, 4 CIF, CIF, QCIF (when Video Resolution is selected)

Frame Rate: 7 frame rates can be selected (1, 2, 3, 5, 10, 12, 25)

Compression Ratio

Set the quality of the delivered images. The size of the image files (JPEG files)

depends on the compression ratio.
– Low: This setting produces highest image quality. The file size increases.

Quality value is set to 90.

–  Mid-low: 70
–  Standard: 50
–  Mid-high: 30
–  High: This setting produces lowest image quality. The file size decreases.

Quality value is set to 10.

– Customized mode: Ratio, Quality value can be adjusted between 3 and 90.

Compression ratio

Set the quality of the delivered images. The size of the image files (JPEG files)

depends on the compression ratio.
– Low compression: This setting produces the highest image quality. The file

size increases.

– Mid compression: Standard setting.
– High compression: This setting produces the lowest image quality. The file

size decreases.

Quality Value: when Customized mode is selected in Compression Ratio, the

quality value can be selected between 3 and 90.
–  Low: default is 31
–  Mid-low: default is 24
–  Standard: default is 16
–  Mid-high: default is 9
–  High: default is 1

MPEG4 - The following settings are enabled when "Image Mode " is set to

"MPEG4".

Resolution

Configure then resolution. The higher the resolution the larger the image file.

Possible settings：SVGA, VGA, QVGA (if PC/VGA Resolution is selected)

D1, 2CIF, 4CIF, CIF, QCIF (if Video Resolution is selected)

Frame Rate: 7 frame rates can be selected (1, 2, 3, 5, 10, 12, 25)

Rate control mode: You can choose between variable bit rate and constant bit

rate.

Compression Ratio

Set the quality of the delivered images. The size of the image files (JPEG files)

depends on the compression ratio.
– Low: This setting produces highest image quality. The file size increases.

Quality value is set to 31.

–  Mid-low: 24
–  Standard: 16
–  Mid-high: 9
–  High: This setting produces lowest image quality. The file size decreases.

Quality value is set to 1.

Summary of Contents for CVMS2025-IR








































































Search results

Summary of Contents for CVMS2025-IR

Reviews:

Siemens CVMS2025-IR, Configuration, Page: 27 / 71

Search results

Summary of Contents for CVMS2025-IR

Reviews: