Siemens CP 5613 A3, Operating Instructions Manual

Page: 25 / 28

CP 5613 A3 / CP 5614 A3
Operating Instructions, 10/2012, C79000-G8976-C277-01
25
Approvals
A
Note
The specified approvals apply only when the corresponding mark is printed on the
communications processor.
Electromagnetic compatibility - EMC directive
The communications processor meets the requirements of the EC Directive:2004/108/EEC
(EMC directive).
The communications processor is designed for use in the following areas:
Requirements Area of application
Emission Immunity
Residential areas, business and commercial
operations, and small businesses
EN 61000-6-3 EN 61000-6-1
Industrial environment EN 61000-6-4 EN 61000-6-2
EC declaration of conformity
You will find the EC declaration of conformity for the communications processor on the
Product Support pages under the following entry ID:
●
For the CP 5613 A3:
58826788 ( http://support.automation.siemens.com/WW/view/en/58826788 )
● For the CP 5614 A3
58826997 ( http://support.automation.siemens.com/WW/view/en/58826997 )
Machinery directive
This communications processor is not a machine in the sense of the EC directive
2006/42/EEC (Machinery Directive). There is therefore no declaration of conformity relating
to this EC Directive for the communications processor.
If the communications processor is part of the equipment of a machine, it must be included in
the procedure for obtaining the declaration of conformity by the manufacturer of the machine.
C-TICK approval
The communications processor meets the requirements of the Australian AS/NZS 3548
standard.