manualshive.com logo in svg

Siemens CP 443-1, Manual, Page: 9 / 76

Share
Download
Siemens CP 443-1 Manual Download Page 9

1 Properties and Services

B4A

−

9

CP 443-1 Advanced for Industrial Ethernet / Manual Part B4A

Release 01/2007
C79000-G8976-C193-06

Project engineering 

You can configure the CP 443-1 Advanced over MPI or LAN/Industrial Ethernet.
You require the following version of STEP 7 with NCM S7: 

Table 1-1

 

STEP 7/NCM S7 Version *)

Functions of the CP 443-1 Advanced

As of V5.2 + hotfix (hotfix 3 for

STEP 7 and hotfix 1 for NCM) or

V5.3

The full functionality of the CP can be used if supplied with firmware

version V1.0.

V5.3 SP3

The full functionality as described in this document can be used.

Note

Note the recommendations in Section 10.4 on operation with a higher

communication load.

Project engineering for the use of PROFINET CBA

To be able to work in the PROFINET CBA environment, you require the SIMATIC
iMap engineering tool.

SIMATIC iMap requires a connection over Industrial Ethernet (TCP/IP protocol).

The following SIMATIC iMap project engineering software is required:

Table 1-2

 

Version of SIMATIC iMap

Functions of the CP 443-1 Advanced

V2.0 + SP1

The full functionality of the device can be used as of hardware

version 2 and firmware version V2.2.

To operate PROFINET CBA, you require the current service packs of SIMATIC
iMap containing the current FB88/FB90:

SIMATIC iMap V2.0 

−

 Download Service Pack 1:

http://www4.ad.siemens.de/WW/view/en/19762802

SIMATIC iMap STEP 7 Add

−

on V2.0 

−

 Download Service Pack 3:

http://www4.ad.siemens.de/WW/view/en/21981502

From an S7

−

400 station in which a CP 443

−

1 Advanced is used for CBA

communication, STEP 7 can generate a  singleton component. This means:

S

The CBA component generated with STEP 7 can only be used once;

Summary of Contents for CP 443-1













































































Reviews:

No comments