manualshive.com logo in svg

Siemens CP 443-1, Manual, Page: 10 / 76

Share
Download
Siemens CP 443-1 Manual Download Page 10

1 Properties and Services

B4A

−

10

CP 443-1 Advanced for Industrial Ethernet / Manual Part B4A

Release 01/2007

C79000-G8976-C193-06

S

Addresses and properties are configured only in STEP 7 and can no longer be

modified in SIMATIC iMap.

Using Programming Blocks for the SEND/RECEIVE Interface

For some communication services, there are ready-made blocks (FCs/FBs)
available as the interface in your STEP 7 user program.

For data transfer on the SEND/RECEIVE interface, there are FCs for short and
long data records:

Table 1-3

 

Function

Requirement

Transfer of data fields <= 240 bytes

S

You require the blocks AG_SEND FC5 and AG_RECV

FC6 

or alternatively

 the blocks  AG_LSEND FC50

and AG_ LRECV FC60.

Transfer of data fields > 240 bytes

S

You require the blocks AG_LSEND FC50 and

AG_LRECV FC60. These blocks are shipped with

NCM.

For a detailed description of these blocks, refer to the general part of this manual
/Part A/). 

Notice

We recommend that you always use the current block versions for all module

types.
You will find information on the current block versions and the current blocks to

download from the Internet in our customer support.

http://www4.ad.siemens.de/view/cs/en/8797900

With the older module types, this recommendation assumes that you are using the

latest firmware for the particular block type.

Summary of Contents for CP 443-1













































































Reviews:

No comments