Microwave
en
17
11.2 Configuring the microwave settings
Notes
¡
Note the correct way to operate the microwave:
– →
– →
"Preventing material damage", Page 6
–
– →
"Cookware and accessories with microwave",
¡
To prevent condensation, when the microwave out-
put is 600 watts (max), the appliance automatically
switches on a heating element. The cooking com-
partment and the accessories become hot. The
cooking result is not affected by this.
You can switch off this drying function in the basic
settings.
WARNING ‒ Risk of burns!
At the highest settings in microwave only mode, the
drying function will automatically switch on an addi-
tional heating element to heat the cooking compart-
ment.
▶
Never touch the inside surfaces of the cooking com-
partment or the heating elements while they are hot.
▶
Keep children at a safe distance.
1.
Press
.
2.
Select the "Microwave" in the operating modes
menu.
3.
Use the rotary selector to set the microwave output
setting.
4.
Press the cooking time.
5.
Use the rotary selector to set the cooking time.
6.
Press
to start the operation.
a
The microwave starts and the cooking time counts
down.
a
Once the cooking time has elapsed, an audible sig-
nal sounds. The time shown in the display is zero.
7.
Once the cooking time has elapsed:
‒
Press
to silence the audible signal manu-
ally.
‒
If necessary, set the microwave output setting
and cooking time again.
‒
When the food is ready, press
to switch the
appliance off.
8.
If you have switched off the drying function for the
microwave in the basic settings, dry the cooking
compartment.
Note:
If you open the appliance door during operation,
the operation stops. When you close the appliance
door, you must press
to continue. If you have
changed the basic setting, make sure that the mi-
crowave does not resume operation without food in-
side.
Changing the microwave output setting
If you change the microwave output setting, the cook-
ing time is reset.
1.
Press
to pause operation.
2.
Press the microwave output setting.
3.
Use the rotary selector to set the microwave output
setting.
4.
Press
to resume operation.
Changing the cooking time
After the microwave starts operating, you can change
the cooking time directly.
▶
Use the rotary selector to change the cooking time.
a
The change is applied immediately.
11.3 Microwave combination
To reduce the cooking time, you can use certain types
of heating in combination with microwave mode.
The possible microwave output settings are:
¡
90 watts
¡
180 watts
¡
360 watts
The possible types of heating are:
¡
4D hot air
¡
Top/bottom heating
¡
Circulated air grilling
¡
Grill, large area
¡
Grill, small area
Setting the microwave combination
Note:
Note the correct way to operate the microwave:
¡
¡
"Preventing material damage", Page 6
¡
¡
"Cookware and accessories with microwave",
1.
Press
.
2.
Select "Microwave combination" in the operating
modes menu.
a
"Type of heating", "Temperature", "Microwave output
setting" and "Cooking time" recommendations are
displayed.
3.
Press the required function.
4.
Set the desired value with the rotary selector.
5.
Press
to start the operation.
a
The appliance starts to heat and the time starts to
count down.
a
Once the cooking time has elapsed, an audible sig-
nal sounds. A notification appears in the status bar.
6.
Once the cooking time has elapsed:
‒
Press
to silence the audible signal manu-
ally.
‒
If necessary, set another combination.
‒
When the food is ready, press
to switch the
appliance off.
Changing the temperature
Once the MicroCombi operation has started, you can
change the temperature directly.
1.
Press the temperature.
2.
Use the rotary selector to change the temperature.
a
The change is applied immediately.
Changing the cooking time
Once the MicroCombi operation has started, you can
change the cooking time at any time.
1.
Press "Cooking time".
2.
Use the rotary selector to change the cooking time.
a
The change is applied immediately.
