Siemens Climatix HMI-DM Basic Documentation Download Page 33

Page: 33 / 36

33/36

Siemens

Climatix HMI-DM

CB1P3916en02

Building Technologies

Functions and operations

2015-07-02

4.12 Firmware update

It is possible to upgrade firmware of HMI-DM over SCOPE tool or SD card. Follow
information as below.

For detailed information about how to upgrade the firmware and about the usage of
SCOPE, refer to

Climatix SCOPE online help

If the firmware version is V9.XXB00YY or lower, it is possible to upgrade HMI-DM
only via SCOPE tool.

If the firmware version is V10.XXB00YY or higher, it is possible to upgrade HMI-DM
via SCOPE tool and SD card.

Please make sure the correct upgrade file (.bin) is used, otherwise HMI-DM will be
ruined.

The procedure of upgrading firmware over SD card is as below:

1. Save only the POL12289.bin file in the root directory of the SD card and insert

the SD card to the controller.

2. Connect the HMI-DM to the controller.

3. Press and hold key

ESC

to enter

Setting and Local connection

page.

4. Select HMI Setting and press key

ROLL.

Following page is displayed.

5. Select Firmware

Update

and press key

ROLL

, and turn the knob and select

Yes

Summary of Contents for Climatix HMI-DM





































Search results

Summary of Contents for Climatix HMI-DM

Reviews:

Related manuals for Climatix HMI-DM

Brands by name

Popular brands

Siemens Climatix HMI-DM, Basic Documentation

Search results

Summary of Contents for Climatix HMI-DM

Reviews:

Related manuals for Climatix HMI-DM

Brands by name

Popular brands