Document ID: A6V10393200_a_en_--
Procedure in case of Fault
Step
1.
Press
on the PMI.
2.
Read
message/fault location
on the display.
3.
Go to the fault location and remedy the cause of
the fault.
4.
Press
on the PMI.
Figure 1
5.
Press
to reset the panel.
If you cannot eliminate a fault, please contact your service provider.
Edition: 2013-07-24
Result
Buzzer on the panel is switched off.
on the display.
Information on type and place of the fault.
Go to the fault location and remedy the cause of
When the fault has been eliminated,
acknowledged. The maintenance personnel is
fault dialer is installed.
If activated, the local alarm equipment
The panel is in normal condition unless an event occur.
If you cannot eliminate a fault, please contact your service provider.
4 / 4
is switched off.
Information on type and place of the fault.
When the fault has been eliminated, the system could be
ntenance personnel is called up if the
the local alarm equipment is silenced.
The panel is in normal condition unless an event occur.
