Time-setting options
en
13
After each use
:
Warning – Risk of scalding!
When you open the appliance door, hot steam can
escape. Steam may not be visible, depending on its
temperature. When opening, do not stand too close to
the appliance. Open the appliance door carefully. Keep
children away.
Moisture and dirt remain in the cooking compartment
after each operation. Therefore dry and clean the
appliance after each use. Also empty the water tank
after each use.
Drying the cooking compartment
:
Warning – Risk of scalding!
The water in the evaporator dish may still be hot. Allow
it to cool before wiping.
1.
Leave the appliance door ajar until the appliance has
cooled down.
2.
Remove any dirt from the cooking compartment
immediately.
3.
Wipe out the cooled cooking compartment and
evaporator dish with the cleaning sponge and dry
with a soft cloth.
4.
Wipe the front of the units dry if condensation has
formed.
Emptying the water tank
The water tank must be emptied and dried after each
steam operation.
Caution!
■
Do not dry the water tank in the hot cooking
compartment. This will damage the water tank.
■
Do not clean the water tank in the dishwasher.This
will damage the water tank.
1.
Open the appliance door.
2.
Remove the water tank and empty the residual
water.
3.
Thoroughly dry the seal in the tank cover and the
water tank recess in the appliance.
4.
Insert the water tank into the water tank recess.
5.
Close the appliance door.
O
Time-setting options
Time-sett
ing optio
ns
Your appliance has different time-setting options.
Notes
■
A cooking time of up to one hour can be set exactly
to the minute.
A cooking time over one hour can be set in five-
minute increments.
■
The maximum setting you can make is 23 hours and
59 minutes.
■
After a time-setting option has elapsed, a signal
sounds.
■
Using the
l
button, you can request information
during operation, which then appears briefly in the
display.
Timer
You can set the timer at any time, even if the appliance
is switched off. It runs parallel to the other time settings
and has a separate audible signal. In this way, you can
tell whether it is the timer or a cooking time which has
elapsed.
The maximum setting you can apply is 24 hours.
1.
Press the
0
button.
The field for the timer opens.
2.
Use the rotary selector to set the timer duration.
The timer starts after a few seconds.
The
U
symbol for the timer and the time counting down
are displayed on the left in the status bar.
When the time has elapsed
An audible signal sounds. "Timer elapsed" appears in
the display. Use the
0
button to cancel the audible
signal early.
Cancelling the timer duration
Press the
0
button to open the time-setting options
menu and turn the time back. Press the
0
button to
close the menu.
Changing the timer duration
Use the
0
button to open the time-setting options menu
and change the timer time in the next few seconds
using the rotary selector. Start the timer with the
0
button.
Time-setting option
Use
Q
Timer
The timer functions like an egg timer. An
audible signal sounds once the set time
has elapsed.
+
Cooking time
A signal sounds once a set cooking time
has elapsed. The appliance switches off
automatically.
*
End
Set a cooking time and an end time. The
appliance switches off automatically so
that the operation ends at the desired
time.
