Installing the
Camera
19
Siemens Building Technologies
Fire Safety & Security Products
03.2005
Using the LEFT/ RIGHT button, set the gain to NORMAL, TURBO or OFF.
NORMAL
Standard position, GAIN=24dB.
TURBO
High-sensitivity position, GAIN=30dB.
OFF
Minimum gain. If this is selected, D/N mode (AUTO) is disabled.
7.2.8
SYNC
Fig. 8
SYNC
Move the cursor to the position shown in Fig. 8.
Use the LEFT/ RIGHT button to choose INT or LL. The LL function is available only
for camera models supplied with AC power.
INT
The camera is in the internal SYNC mode.
LL
The camera is in the line lock mode; you can adjust the phase angle from 0 ~ 300°
accordingly. The default is 0°.
NOTE:
For DC power models, the SYNC will be set automatically to INT mode.
7.2.9
BLC
Fig. 9
BLC
This function is for selecting the backlight mode (OFF, BLC1, BLC2, BLC3, BLC4,
BLC5, BLC6)
Move the cursor to the position shown in Fig. 9.
D/N MODE AUTO
D/N LEVEL HIGH
D/N DELAY 15 sec
EXPOSURE <ALC>
SHUTTER 1/50
SENS UP OFF
GAIN NORMAL
SYNC LL:000
BLC OFF
NEXT EXIT CANCEL DEFAULT
D/N MODE AUTO
D/N LEVEL HIGH
D/N DELAY 15 sec
EXPOSURE <ALC>
SHUTTER 1/50
SENS UP OFF
GAIN NORMAL
SYNC LL:000
BLC OFF
NEXT EXIT CANCEL DEFAULT
