Installing the
Camera
16
Siemens Building Technologies
Fire Safety & Security Products
03.2005
7.2.2
D/N LEVEL
Fig. 2
D/N LEVEL
This function sets the filter switchover point to high, low or medium.
Configure a switchover point from COLOR mode to B/W mode. Move the cursor to
the position shown in Fig. 2. Use the LEFT/ RIGHT button to select HIGH, LOW or
MID. This setting is only relevant if the D/N mode is set to AUTO.
LOW
The brightness for switchover from COLOR to B/W mode is approx. 1 lux.
MID
The brightness for switchover from COLOR to B/W mode is approx. 2 lux.
HIGH
The brightness for switchover from COLOR to B/W mode is approx. 4 lux.
7.2.3
D/N DELAY
Fig. 3
D/N DELAY
This function sets the DELAY time for the D/ N function
Move the cursor to the position shown in Fig. 3.
Use the LEFT/ RIGHT button to select 0, 5, 10, 15 or 20 sec for delay of DN filter
moving timing. This setting is only relevant if the D/N mode is set to AUTO.
Info:
If using the camera together with
infrared illumination
, we recommend using
video lenses
with
special
IR coating
to prevent a physically based focus-shift between daylight and IR illumination.
We recommend using the
D/N mode “MANUAL”
when the camera is used with discrete IR
illumination in order to prevent the continual switching between color and B/W mode that might occur
with the D/N mode “AUTO”.
D/N MODE AUTO
D/N LEVEL HIGH
D/N DELAY 15 sec
EXPOSURE <ALC>
SHUTTER 1/50
SENS UP OFF
GAIN NORMAL
SYNC LL:000
BLC OFF
NEXT EXIT CANCEL DEFAULT
D/N MODE AUTO
D/N LEVEL HIGH
D/N DELAY 15 sec
EXPOSURE <ALC>
SHUTTER 1/50
SENS UP OFF
GAIN NORMAL
SYNC LL:000
BLC OFF
NEXT EXIT CANCEL DEFAULT
