GETTING STARTED
12
GETTING STARTED
13
Turning the hearing instrument on or off
To turn the hearing instrument on, insert a battery into
the hearing instrument and completely close the door.
To turn the hearing instrument off, open the battery door
to the first catch.
Siemens hearing instruments may also be programmed
to allow you to turn them on and off using the program
button. Refer to the Operation section (page 31) for further
information.
You can also use an optional remote control to turn the
hearing instruments on and off.
Some BTE’s may also have a LED light (Fig.5) near the
battery door.
The LED (optional) shows whether the hearing
instruments are on.
LED can be covered
or programmed on/off
• The LED shines continuously.
The hearing instruments are switched on and
sufficient battery power is available.
• The LED is off.
The hearing instruments are switched off or the
battery must be replaced.
Attaching the earpiece (where provided)
If your earpiece detaches, gently insert the earhook of the
hearing instrument into the tubing of the earpiece supplied
by your Audiologist or Hearing Care Provider (Fig. 6).
Fig. 5: LED light
LED light