Siemens BE634LGS1M, Instruction Manual

Page: 15 / 52

Timer
en
15
O
Timer
Timer
You can use the timer as a kitchen timer. The timer runs
alongside other settings. You can set it at any time,
even if the device is switched off. It has its own audible
signal so that you can tell whether it is the timer or a
cooking time which has elapsed.
Setting the timer
The maximum setting is 24 hours.
The higher the value, the longer the time intervals.
1.
Press the
0
button.
The timer is displayed.
2.
Use the rotary selector to set the timer duration.
3.
Press the
0
button to start.
Note:
The timer will also start automatically after a
few seconds.
The timer duration counts down. The display switches
back after a short time. A timer symbol and the elapsed
time are shown in the status bar.
An audible signal sounds once the timer duration has
come to an end. Use the
0
button to cancel the audible
signal early.
Notes
■
The timer remains visible in the display if the
appliance is switched off.
■
If an operating mode is running, touch the
0
button
to display the timer. The timer duration is displayed
for a few seconds and can be altered.
Changing the timer
Touch the
0
button to change the timer duration. The
timer duration is displayed – use the rotary selector to
change it.
Cancelling the timer
If you want to cancel the timer, reset the duration on the
timer to zero. Once the change has been applied, the
symbol is no longer lit up.
P
Programmes
Programmes
You can prepare food really easily using the various
programmes. You select a programme and enter the
weight of your food. The program then applies the most
suitable settings.
Setting a programme
Example: "Defrost bread" programme, weight 250 g.
1.
Press the on/off button.
The appliance is ready to use.
2.
Press the menu button.
The operating modes are shown.
3.
Use the rotary selector to select "Programmes".
4.
Touch the
¿
arrow.
The first programme appears in the display.
5.
Use the rotary selector to set the required
programme.
The required programme is selected. The default
value for the weight appears in the display.
6.
Touch the
¿
arrow.
The weight can be set.
7.
Use the rotary selector to set the required weight.
8.
Touch the
¿
arrow.
The preparation instruction is displayed.
9.
Press the start/stop button to start.
The appliance starts the operation. The time counts
down on the display.
Notes
■
The cooking time is calculated by the programmes.
■
For some dishes, the display provides instructions
for turning or stirring during preparation. Follow the
information provided. Opening the appliance door
pauses the operation. After closing the appliance
door, restart the operation. If you do not turn or stir
the dish, the programme runs as normal until it
reaches the end.
PQFO TUBSUTUPQ
7LPHUPLQV
PO PGG NFOV O
J 'HIURVWEUHDG
PLQV
!
PQFO TUBSUTUPQ
J 'HIURVWEUHDG
PLQV
!