25
Setup
© Siem
ens AG 2004, C
:\D
at
en
_i
tl\Si
emens
\D
TP-Sa
tz\Produkte\AX75_Pe
gasus_3\out-
Temp
late:
X75,
Ve
rsion 2
.2
; VAR
Language: en;
VAR
issu
e d
ate: 0
50613
right page (25)
of AX75 Pegasus FUG, en, A31008-H2850-A1-3-7619 (12.08.2005, 12:23)
IrDA
Your phone has an infrared interface.
With this interface, you can exchange
data such as pictures, ringtones and
phonebook entries with other appliances
which also have an infrared interface. The
distance between two devices must not
exceed 30 cm. The infrared windows in
both devices must be aligned as accurate-
ly as possible with each other.
Authentication
D
Activate or deactivate encrypted In-
ternet dial-up (CSD connections only).
Data services
§Menu§
¢
m
¢
Connectivity
¢
Select function.
For the
MMS, WAP
and
HTTP
applications
at least one connection profile must be
set up and activated.
The default for the phone depends on
each service provider:
• The settings have already been imple-
mented by the provider. You can start
immediately.
• Access profiles have already been cre-
ated by your provider. Then select and
activate profile.
• The access profiles must be configured
manually.
If necessary, check with your service
provider for details. If necessary enter
CSD settings
and
GPRS settings
(your
service provider will supply you with
information on this if necessary or
www.siemens.com/
mobilephonescustomercare
in the FAQ
section).
Select profile
¢
D
¢
Change setting
¢
§Options§
¢
§Edit§
¢
(Enter data)
¢
§Save§
.
HTTP profile
Select profile with
G
. Enter or modify
settings. If necessary, check with your
service provider for details.
Fax/data
Rec fax/data
b
The call is signalled by a special ringtone
and the type of call (fax or data) is dis-
played. Now start the communication
program in your PC to receive the
fax/data.
Send voice/fax
b
To switch from voice mode to fax mode,
set the function on the phone
before
transmission.
Rec voice/fax
b
After starting the PC communication pro-
gram, activate the function
during
a call.
End transmission
End transmission with PC software and/or
press
B
.
Security
§Menu§
¢
m
¢
Security
¢
Select function.
Auto key lock
The keypad is locked automatically if no
key has been pressed for one minute in
standby mode. This prevents the phone
from being used accidentally. However,
you can still be called and you can still
make an emergency call.
Direct call
(Phone-code protected)
Only
one
phone number can be dialled.
