AX75 Level 2 Service Manual
Copyright © Siemens Pte Ltd.
All Rights Reserved
May 2005
COM D CCQ SLI APAC
Page 18 of 34
Internal Use Only
8.1 Mobile Software Updating
The software of the 75 series mobiles, is loaded from a PC directly. Hardware
interconnection between the mobile and the PC is shown in Figure 1. Because of the new
type of external connector used since 55 series (Slim-Lumberg type) an additional
adaptor cable between mobile and boot adaptor is required. Table 1 listed all the
hardware requirements
If you use the battery dummy, make sure that the power supply voltage is correctly
adjusted.
Description Part
No.
Bootadapter 2000 incl. AC-Adapter, serial
cable and mobile connection cable
L36880-N9241-A200
IBM Compatible PC – Pentium
-
Adapter cable – Slim Lumberg to Old
F30032-P226-A1
TABLE 1. EQUIPMENT LIST FOR SOFTWARE PROGRAMMING
