![background image](http://html.mh-extra.com/html/siemens/asterisk-openstage-20/asterisk-openstage-20_owners-manual_383992052.webp)
Administration
A31003-S2000-M102-1-76A9, 06/02/2009
3-24
Asterisk - OpenStage Family, Administration Manual
administration.fm
IP Network Parameters
Traps specific to OpenStage phones
Currently, the following traps are defined:
TraceEventFatal
: sent if severe trace events occur; aimed at expert users.
TraceEventError
: sent if severe trace events occur; aimed at expert users.
Data required
•
Trap sending enabled
: Enables or disables the sending of a TRAP message to the SNMP
manager.
Value range: "Yes", "No".
Default: "No".
•
Trap destination
: IP address or hostname of the SNMP manager that receives traps.
•
Trap destination port
: Port on which the SNMP manager is receiving TRAP messages.
•
Default: 162.
•
Trap community
: SNMP community string for the SNMP manager receiving TRAP mes-
sages.
Default: "snmp".
•
Queries allowed
: Allows or disallows queries by the SNMP manager.
•
Query password
: Password for the execution of a query by the SNMP manager.
•
Diagnostic sending enabled
: Enables or disables the sending of diagnostic data to the
SNMP manager.
Value range: "Yes", "No".
Default: "No".
•
Diagnostic destination
: IP address or hostname of the SNMP manager receiving diag-
nostic data.
•
Diagnostic destination port
: Port on which the SNMP manager is receiving diagnostic
data.
•
Diagnostic community
: SNMP community string for the SNMP manager receiving diag-
nostic data.
•
QoS traps to QCU
: Enables or disables the sending of TRAP messages to the QCU serv-
er.
Value range: "Yes", "No".
Default: "No".
•
QCU address
: IP address of the QCU server.
•
QCU port
: Port on which the QCU server is listening for messages.
Default: 12010.
•
QCU community
: QCU community string.
Default: "QOSCD".