Siemens Arcteq AQ01, Instruction Manual

Page: 21 / 48

Instruction manual AQ101, AQ101D, AQ110P, AQ01 21 (48
)
LED Color OFF Steady ON Blinking
Arcteq logo Blue Auxiliary supply
disconnected
Auxiliary power
connected
N/A
Power Blue Auxiliary supply
disconnected
Auxiliary power
connected
N/A
Error Red System healthy System failure Configuration
mismatch. Protection
partly operational.
T1 / T2 / T3 /
T4
Red Normal status Corresponding trip
relay activated
N/A
S1 Amber Normal status Corresponding
sensor channel
activated.
Corresponding sensor
channel have loose
connection or system
set-up not performed.
S2 / S3 / S4 Amber Normal status Corresponding
sensor channel
activated.
Corresponding sensor
channel have loose
connection or system
set-up not performed;
S5 (AQ110P) Amber Normal status Corresponding
sensor or quenching
device channel
activated.
Corresponding sensor
channel have loose
connection or system
set-up not performed;
BI1 / BI2 Amber Normal status Corresponding
binary input
activated
Corresponding binary
input have loose
connection
BO1 Amber Normal status Binary Output
activated
N/A
IL1 / IL2 / IL3 Amber Normal status,
measured current
below set point
Corresponding
current channel
above set point.
Overcurrent stage
activated.
Unbalance alarm,
corresponding channel
CT connection is open,
corresponding channel
activated for over 10s
Io Amber Normal status,
measured current
below set point
Residual current
above set point.
Overcurrent stage
activated.
N/A
HSO1 /
HSO 2
Red Normal status HSO channel
activated.
N/A
Table 3-2: AQ110P LED indications definition.