Siemens AR10S-MF Installation And Mounting Manual Download Page 9 | Manualshive

Page: 9 / 44

Siemens AR10S-MF Installation And Mounting Manual Download Page 9

5 Mounting and connecting

5 Mounting and connecting

The reader enables two different mounting alternatives: surface mounted and back box
mounted. Those come in two different varieties, depending on how the wires are fed or
which kind of back box is used. The reader is delivered with components to support
the two mounting alternatives. Please note that the alternatives only require some of
the different components. Before mounting the reader, identify the parts which are
needed for the appropriate alternative.

Please refer to respective page for:

l

"Surface mounted reader" on the next page– the reader is mounted on the base,

which first is fastened on a wall.

l

"Surface mounted reader with cables fed from outside" on page 11 – the reader is

mounted on the base and the cables are connected via one of the knock outs.

l

"Back box mounted reader " on page 13 – the reader is partly mounted inside a

back box in a wall. The two extra screws prevent the reader from rotating.

For connecting the cables to the reader, please refer to: "Connecting the cables"

on page 14.

9

Siemens Switzerland Ltd

2017-07-14

«
...
7
8
9
10
11
...
»

Summary of Contents for AR10S-MF













































Reviews:

No comments