manualshive.com logo in svg

Siemens AC75, Hardware Interface Description, Page: 17 / 120

Share
Download
Siemens AC75 Hardware Interface Description Download Page 17

AC75 Hardware Interface Description 

Strictly confidential / Preliminary 

s

 

AC75_HD_V00.202 

Page 17 of 120 

27.04.2006 

Feature 

Implementation 

SMS 

•

  Point-to-point MT and MO 

•

 Cell 

broadcast 

•

  Text and PDU mode 

•

  Storage: SIM card plus 25 SMS locations in mobile equipment

•

  Transmission of SMS alternatively over CSD or GPRS. 

Preferred mode can be user defined. 

Fax 

Group 3; Class 1 

Audio Speech 

codecs: 

•

  Half rate HR (ETS 06.20) 

•

  Full rate FR (ETS 06.10)  

•

  Enhanced full rate EFR (ETS 06.50/06.60/06.80) 

•

  Adaptive Multi Rate AMR 

Speakerphone operation (VDA), echo cancellation, noise 
suppression, DTMF, 7 ringing tones 

Software 

AT commands 

AT-Hayes GSM 07.05 and 07.07, Siemens 
AT commands for RIL compatibility (NDIS/RIL) 

Microsoft

TM

 compatibility  RIL / NDIS for Pocket PC and Smartphone 

Java platform 
JDK Version: 1.4.2_09 

Java Virtual Machine with APIs for AT Parser, Serial Interface, 
FlashFileSystem and TCP/IP Stack.  
Major benefits: seamless integration into Java applications, ease 
of programming, no need for application microcontroller, 
extremely cost-efficient hardware and software design – ideal 
platform for industrial GSM applications. 
The memory space available for Java programs is around 1.7 MB 
in the flash file system and around 400k RAM. Application code 
and data share the space in the flash file system and in RAM. 
 

SIM Application Toolkit 

SAT Release 99 

TCP/IP stack 

Access by AT commands 

IP addresses 

IP version 6 

Remote SIM Access 

AC75 supports Remote SIM Access. RSA enables AC75 to use a 
remote SIM card via its serial interface and an external 
application, in addition to the SIM card locally attached to the 
dedicated lines of the application interface. The connection 
between the external application and the remote SIM card can be 
a Bluetooth wireless link or a serial link.  
 
The necessary protocols and procedures are implemented 
according to the “SIM Access Profile Interoperability Specification 
of the Bluetooth Special Interest Group”. 
 

Firmware update 

Generic update from host application over ASC0, ASC1 or USB. 
Over-the-air (OTA) firmware update is possible via SPI interface. 
 

Summary of Contents for AC75

























































































































Reviews:

No comments