manualshive.com logo in svg

Siemens A31003-D3000-M100-01-76A9, Administrator User Manual

Share
Download
Siemens A31003-D3000-M100-01-76A9 Administrator User Manual Download Page 96

Administration

 A31003-D3000-M100-01-76A9, 02-2013

96

OpenScape Desk Phone IP, Phone Administration, Administrator Documentation

System Settings

Administration via WBM

System > SIP interface

Related Topics

3.5.9.2  Response Timer

The 

Response Timer

 resp. 

Call trans.

 timer is started whenever the phone 

sends a new INVITE message to the SIP server. 

If the call transaction timer expires before the phone gets a response from the SIP 
server, the phone assumes that the server had died and then attempts to contact 
the backup server, if configured. If there is no backup server configured, the 
phone just tidies up internally.

The data is given in milliseconds. The default value is 32 000; for OpenScape 
Voice, the recommended setting is 3.7 seconds (3700 ms).

Administration via WBM

System > SIP interface

Summary of Contents for A31003-D3000-M100-01-76A9


























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands