manualshive.com logo in svg

Siemens A31003-D3000-M100-01-76A9, Administrator User Manual

Share
Download
Siemens A31003-D3000-M100-01-76A9 Administrator User Manual Download Page 92

Administration

 A31003-D3000-M100-01-76A9, 02-2013

92

OpenScape Desk Phone IP, Phone Administration, Administrator Documentation

System Settings

Media IP mode

 defines which IP version is to be used for voice transmission. 

With "IPv4", only IPv4 is used; with "IPv6", only IPv6 is used; with "IPv4_IPv6", 
both IPv4 and IPv6 can be used, but IPv4 is preferred; with "IPv6_IPv4", both IPv6 
and IPv4 can be used, but IPv6 is preferred.

Administration via WBM

System > SIP interface

Administration via Local Phone

Related Topics

3.5.8  SIP Session Timer

Session timers provide a basic keep-alive mechanism between 2 user agents or 
phones. This mechanism can be useful to the endpoints concerned or for stateful 
proxies to determine that a session is still alive. This is achieved by the phone 
sending periodic re-INVITEs to keep the session alive. If no re-INVITE is received 
before the interval passes, the session is considered terminated. Both phones are 
supposed to terminate the call, and stateful proxies can remove any state for the 
call.

This feature is sufficiently backward compatible such that only one end of a call 
needs to implement the SIP extension for it to work.

 

|

--- Admin

       |--- System

             |--- SIP Interface

                   |--- Media negotiation

                   |--- Media IP mode

Summary of Contents for A31003-D3000-M100-01-76A9


























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands