English
7XV5655-0BA00
31 / 53
C53000-G1176-C174-3
View Event Log
View current logfile (internal trace)
Properties
Type-specific configuration user interface
For more information, see the relevant sections.
Note regarding storage of the Properties
“IP-Address“
, “
Name“
and “
Password“
are saved in the Serial Hub.
The virtual
”COM-Port“
and the associated
”IP-Address“
are saved in each operator PC.
All other settings
are saved in the operator Pc.
The Config Tool displays the settings of the operator PC and Serial Hub.
Each time the COM-Ports is opened “all other settings” along with the “baud rate” and “data
format” are transferred from the application to the Serial Hub.
If more than one operator PC is used to access the same Serial Hub, then these settings
must be applied on all these operator PCs. The virtual COM-Port for a particular Serial Hub
may be different on different operator PCs.
If the Serial Hub is “in use”, i.e. it is connected to an operator PC, it is barred for all other
operator PCs and the allocated COM-port for this Serial Hub is not shown in the application.
In this manner a data collision is avoided is such a “multi master system”.
