Siemens 7SR157 Argus Page 127 Manual Download | Manualshive

Page: 127 / 180

background image

Chapter 4 - 7SR157 · Data Communications Definitions

© 2016 Siemens Protection Devices Limited

Chapter 4 - Page 53 of 58

9. Configuration

The data points and control features which are possible within the relay is fixed and can be transmitted over
the communication channel(s) protocols in the default format described earlier in this document. The default data
transmitted is not always directly compatible with the needs of the substation control system and will require some
tailoring; this can be done by the user with the Reydisp software Communications Editor tool.

The Communications Editor is provided to allow its users to configure the Communication Protocol's Files in Reyrolle
brand Relays manufactured by Siemens Protection Devices Limited (SPDL).

The editor supports configuring DNP3, IEC60870-5-103, IEC60870-5-101 and MODBUS protocols.

The editor allows configuration files to be retrieved from the relay, edited, and then uploaded back to the relay. Files
may also be saved to and loaded from disc to work offline. The protocols will be stored in a Reyrolle Protection Device
Comms file (RPDC), which will be stored locally, so that the editor can be used when the relay is not connected.

DNP3

The tool will allow:

•

Data Points to be enabled or disabled.

•

Changing the point numbers for the Binary Inputs, Double Bit Inputs, Binary Outputs,
Counters and Analogue Inputs.

•

Changing their assigned class and static and event variants.

•

Specifying inclusion in a Class 0 poll.

•

Setting Binary points to be inverted before transmission.

•

Setting the Control Relay Output Block (CROB) commands that can be used with a
Binary Output (Object 12).

•

Specifying a dead-band outside which Analogue Events will be generated.

•

Specifying a multiplier that will be applied to an analogue value before transmission.

•

Configuring a Counter's respective Frozen Counter.

IEC60870-5-103

The tool will allow:

•

Data Points to be enabled or disabled.

•

Changing the point numbers Function Type (FUN) and Information (INF), returned by
each point.

•

Changing the text returned to Reydisp for display in its event viewer.

MODBUS

Note, as MODBUS points are polled they do not need to be enabled or disabled.

The tool will allow:

«
...
125
126
127
128
129
...
»

Summary of Contents for 7SR157 Argus





















































































































































































Reviews:

No comments

Related manuals for 7SR157 Argus

Brand: Baker Instrument Company Pages: 24

Brand: SALUDA MEDICAL Pages: 61

Brand: Dairyland Pages: 21

Brand: RASHA PROFESSIONAL Pages: 11

Brand: MADRIX Pages: 24

Brand: MADRIX Pages: 28

Brand: Nemalux Pages: 6

Brand: OBDLink Pages: 2

Brand: Ultrawave Pages: 30

Brand: Ultrasound Technologies Pages: 12

Brand: H&S Pages: 54

Brand: Samson Pages: 2

Cutler-Hammer ATC-300

Brand: Eaton Pages: 32

Brand: JBL Pages: 17

CIRCOLINA G10q T9

Brand: Life Pages: 2

LUNAQUA Classic LED

Brand: Oase Pages: 16

Brand: GAPOSA Pages: 32

Brand: Kanlux Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands