01.02
Instruction manual
High-Resolution 18" LCD Monitors SCD 1898-I/IT
25
A5E00120696
3.3
Cable Connections and Pin Assignments
The LCD monitor has been tested and set-up in the factory.
•
Before use, the power supply and the VGA signals should be connected to the
sockets provided. Connections to the monitor should adhere to
EMC regulations.
A high-quality 75-ohm coaxial cable must be used for the VGA-signals.
Low quality cables can result in interference and shadowing on the display.
VGA Interface
The VGA interface is a standard 15-pin male HD-D-type connector.
Pin
Signal
1
Video input RED
2
Video input GREEN
3
Video input BLUE
4
Not used
5
Not used
6
GND (RED)
7
GND (GREEN)
8
GND (BLUE)
9
Not used
10
GND
11
Not used
12
Not used
13
H-Sync.
14
V-Sync.
15
Not used
Power Supply
Power is supplied to the SCD 1898 I/IT LCD monitor via a standard power
connector on the rear of the unit.
