The Compact FF Link is available for the transition of the transmission system from
PROFIBUS DP to FF-H1 bus.
Note
Use in hazardous areas
The Compact FF Link is approved only for use in Zone 2 hazardous areas.
● When planning for use in hazardous areas, pay attention to the approved use area of the
individual components.
● If you want to use the devices on the FF-H1 bus in the hazardous area, all utilized
components must be approved for use in that area.
2.2
Integrating Compact FF Link
The following figure shows the basic integration of the Compact FF Link into the automation
landscape and refers to the documentation of the respective system components.
0DQXDOV3&63'0
0DQXDOV67(3+:&RQILJ&38
7KLVPDQXDO
PD[
3ODQWEXV
'3PDVWHU
3&6HQJLQHHULQJPDLQWHQDQFHVWDWLRQ
ZLWK3URFHVV'HYLFH0DQDJHU3'0
)281'$7,21)LHOGEXV
352),%86'3
&RPSDFW))/LQN
Figure 2-1
Integration of the FF Link into the information landscape
The Compact FF Link acts as a DP slave for the automation system and an FF Link Master
for the FF devices.
Product overview
2.2 Integrating Compact FF Link
Compact FF Link
12
Operating Instructions, 03/2015, A5E35651552-AA
