Properties
IM151-1 FO STANDARD interface module (6ES7151-1AB05-0AB0)
10
Manual, 02/2010, A5E01075965-03
Acyclic data traffic class 2 services (PG/OP)
The interface module IM 151-1 FO STANDARD supports 3 connections via class 2 services
(PG/ OP).
Updating the firmware of the IM151-1 FO STANDARD
The IM151-1 FO STANDARD firmware can be updated starting with
STEP 7 V5.4 (via
accessible nodes).
To update the firmware, you receive the *.UPD files containing the current firmware.
The following requirements must be satisfied:
●
The IM151-1 FO STANDARD in the station whose firmware is to be updated must be
accessible online.
●
The files with the current firmware version must be available in the file system of your
programming device or PC.
Information regarding the method of procedure can be found in the
STEP 7 online help.
Note
Make sure to use the correct firmware version for the interface module in use during the
update process. An interface module with an older order number cannot be updated with the
firmware version for an interface module with a more recent order number and vise versa.
Configuration with more than 244 bytes of parameter data
For configurations with
STEP 7 V5.4, it is possible to operate the IM151-1 FO STANDARD
from 6ES7151-1AB05-0AB0 in DPV1 mode with more than 244 bytes of parameter data.
A configuration based on the GSD file does not offer this possibility.
Note
If the parameter length is greater than 244 bytes, an increase in the station startup time is to
be expected.
Summary of Contents for 6ES7151-1AB05-0AB0
Page 59: ......
