Safety instructions and further information
2.4 Notes about usage
IFP2200 INOX MT ETH
Compact Operating Instructions, 07/2021, A5E42185570-AD
15
Note
The device is intended for operation in an SELV/PELV circuit according to IEC/EN 61010-2-201
in a dry environment, which means a dry environment on the rear of the device.
You can find additional information in the section "Operating conditions (Page 40)".
Industrial applications
The HMI device is designed for industrial applications. It conforms to the following standards:
•
Requirements for emissions EN 61000-6-4: 2007 +A1:2011
•
Requirements for interference immunity EN 61000-6-2: 2005
Use in mixed-use zone
Under certain circumstances, you can use the HMI device in a mixed-use zone. A mixed-use
zone is used for housing and commercial operations that do not have a significant impact on
residents.
When you use the HMI device in a mixed-use zone, you must ensure that the limits of the
generic standard EN 61000-6-3 regarding emission of radio frequency interference are
observed. Suitable measures for achieving these limits for use in a mixed-use zone include:
•
Installation of the HMI device in grounded control cabinets
•
Use of filters in electrical supply lines
Individual acceptance is required.
Use in residential areas
Note
HMI device not intended for use in residential area
The HMI device is not intended for use in residential areas. Operation of an HMI device in
residential areas can have a negative influence on radio or TV reception.
