4
Siemens
Datasheet
A6V11980238_en--_a
Smart Infrastructure
2021-01-28
Mechanical design
The device consists of the following parts:
●
Touch panel with electronics, operating elements and built-in room temperature sensor
●
Mounting plate is an additional part to complete the installation for 5WG1205-2AB21
Operation and display
No.
Product description
No.
Product description
①
Display and touch operation area
⑥
Micro SD card slot
②③
Proximity sensor
⑦
KNX bus connection terminal
④
Color light strip
⑧
Built-in temperature sensor
⑤
Auxiliary power supply connection
terminal
Note
●
Entering programming mode:
– Click the setting icon
in home page;
– Goes to “General”;
– Enable "KNX programming", then the colorful strip turns red and device can be
configured via ETS.
●
KNX programming function need to be done by professional engineers. Make sure this
function is disabled during daily operation and if it is enabled:
– The device can operate normally.
– The color strip is constant red and it affects the strip life span.
●
Micro SD card is used for modifying the background picture, electronic photo album,
icons for home page or multi-functional pages. SDHC card and FAT32 format are only
supported and the capacity of Micro SD cards is not greater than 32 GB.
