instabus EIB
Technical Product Information
June 2005
Wall switch, single UP 221 E
5WG1 221-2EB..
Wall switch, dual UP 222 E
5WG1 222-2EB..
Siemens AG
UP 22x E, 4 pages
Technik-Handbuch
Bereich Automation and Drives
Geschäftsgebiet Electrical Installation Technology
© Siemens AG 2005 Update:
http://www.siemens.de/gamma
Postfach 10 09 53, D-93009 Regensburg
Änderungen vorbehalten
2.16.1.9/1
Product and Applications Description
The wall switches UP 221 E / UP 222 E are available in
the following colors, matching the design of the wall
switch design line DELTA i-system:
Wall switch, single UP 221 E
electro white
5WG1 221-2EB01
titanium white
5WG1 221-2EB11
carbon metallic
5WG1 221-2EB21
aluminum metallic
5WG1 221-2EB31
Wall switch, dual UP 222 E
electro white
5WG1 222-2EB01
titanium white
5WG1 222-2EB11
carbon metallic
5WG1 222-2EB21
aluminum metallic
5WG1 222-2EB31
The wall switch UP 221 E / UP222 E is slid onto the bus
coupling unit UP together with its DELTA line / DELTA
vita / DELTA miro frame. At the same time the electric
connection between the wall switch UP 2221 E / UP 222
E and the bus coupling unit UP is established via a
physical external interface (PEI).
The wall switch requires a bus coupling unit and an
appropriate application program to work properly, i.e. the
wall switch UP 2221 E / UP 222 E (in combination with a
bus coupling unit UP) consists of the device (hardware)
and the application program (software).
The required bus coupling unit UP and DELTA line /
DELTA vita / DELTA miro frame are not included and
therefore have to be ordered separately (see current
catalog).
An application program is available for the different
tasks the wall switch can be applied to.
With an appropriate application program the wall switch
UP 221 E / UP 222 E can control actuators via its bus
coupling unit, e.g., for defined on and off switching, dim-
ming fluorescent lamps or for raising and lowering ve-
netian blinds and adjusting the louvres.
Opposite rockers are combined for switching purposes
e.g. for defined switching, dimming, controlling sliding
shutters and blinds, i.e. the left rocker is used for e.g.
switching on and the right rocker for switching off.
The LEDs positioned with the right rocker may be used
as status indicators.
With the ETS (
EIB
Tool Software) the application pro-
gram is selected, its parameters and addresses are
assigned appropriately, and downloaded to the bus
coupling unit UP.
Application Programs
Wall switch, single UP 221
12 S1 E-A-U/Dim/Jalo/Scene 212001
•
Switching On/Off/Toggle
•
Dimming
•
Shutter/Blind up/down, slats movement
•
Send value
•
Scene (1-bit)
•
Status LED
20 S1 Rocker (BCU2) 908402
•
Switching On/Off/Toggle
•
Dimming
•
Shutter/Blind up/down, slats movement
•
Send value
•
Scene (1-bit)
•
Status LED
Wall switch, dual UP 222
12 S2 E-A-U/Dim/Jalo/Scene 222001
selectable per pair of rocker switches
•
Switching On/Off/Toggle
•
Dimming
•
Shutter/Blind up/down, slats movement
•
Send value
•
Scene (1-bit)
•
Status LED
20 S1 Rocker (BCU2) 908502
•
Switching On/Off/Toggle
•
Dimming
•
Shutter/Blind up/down, slats movement
•
Send value
•
Scene (1-bit)
•
Status LED
