SIEMENS 5881 Broadband Internet Router
User’s Guide
Chapter 6 Security Setup
NAT
SIEMENS
51
Configure Host Mapping
To configure the mapping between private IP addresses and public IP addresses:
1. Click
NAT Host Mapping
on the left navigation pane. This displays the NAT Host Settings page.
2. Select the interface you want to configure from the
Interface
drop-down menu.
3. In
Beginning LAN IP
, enter the first private IP address you want to map to a public address.
4. In
Ending LAN IP
, enter the last private IP address you want to map to a public address.
5. In
Beginning WAN IP
, enter the first public IP address you want to map to a private IP address. It is only
necessary to specify a starting IP address. The rest of the addresses in the range are computed
automatically.
6. Click
Add
. This adds the entry to the Current Host Mapping Entries table.