Siemens Energy & Automation, Inc.
Bellefontaine, OH 43311 U.S.A.
Installation Instructions
Hazardous voltage.
Will cause death or
severe injury.
Turn off and lock out all power
supplying this device before
removing cover(s) or device and
while cover(s) are removed.
Replace all covers and shields
before power supplying this
device is turned on.
Page
3 of 4
Fig. 4
PUSH-TO-TRIP BUTTON
SEE FIGURES 5 and 6.
HANDLE
ON
TRIP
OFF
RESET
MANUAL OPERATION
Manual operation of the circuit breaker is controlled
by the circuit breaker handle and the PUSH-TO-
TRIP button. The circuit breaker handle has three
indicating positions, two of which are molded into
the handle to indicate ON and OFF. The third
position indicates a TRIP position and is between
the ON and OFF positions. (See Fig. 4)
A. Circuit Breaker Reset
After tripping, the circuit breaker is reset by
moving the circuit breaker handle to the reset
position and then moving the handle to the ON
position.
B. The PUSH-TO-TRIP Button
The PUSH-TO-TRIP button checks the tripping
function and is used to manually exercise the
operating mechanism.
