Communication System Manual
3VF Circuit-Breakers
Version 1.0 (05/98)
Copyright Siemens AG 1998. All rights reserved.
19
2.1.6 Parameter file
Selection:
Assignment:
Notes, Codes:
General:
Order number
= 3UF5001-3BN00-1
Customer selection
(230 V version here)
Current range
= 1.25 - 6.3 A
(Customer selection)
Output response
= monostable
(Customer selection)
Outputs/Inputs
= Earth fault (external)
Not assigned
Family
= Switchgear
DP slave type
= SIMOCODE-DP
Designation
= 3VF communication
Comment
= ' '
PROFIBUS address
= 8
Customer selection
Baud rate
= 1.5 Mbaud
Customer selection
Motor Protection:
Response in event of overload
= Warn
Tripping characteristic
= CLASS 30
Motor type
= Three-phase
Reset
= Auto
Blocking threshold
= 500 %
Recovery time
= 00:00.0
Idle time
= 00:00.0
Set current Ie1
= ?? A
Rated or setting current for 3VF, to
be defined by customer.
Set current Ie2
= 0.00 A
Upper current limit:
DS 130 Par 38
Value
= 120 %
Default setting (can be changed by
customer)
Response
= Warn
Lower current limit:
DS 130 Par 39
Value
= 80 %
Default setting (can be changed by
customer)
Response
= Warn
Sensors:
None
Sensor type
= No sensor
Short-circuit monitor
= No
Response of binary PTC
= Shutdown
Analog switch-off threshold
= 0 ohm
Analog warning threshold
= 0 ohm
Internal ground fault detection
= Yes
External ground fault detection
= No
Response of ground fault detection
= Warn
Motor:
Control function
= Overload relay
Run-time
= 00:00.0
CS-time
= 00:00.0
Locking time
= 00:00.0
CSC - Check-back signal closed
= Not connected
CSO - Check-back signal open
= Not connected
TC - Torque closed
= Not connected
TO - Torque open
= Not connected
