Siemens 3TM, Operating Instructions Manual

Page: 21 / 52

Description
9229 0106 176 0- 21
2020-09-18
ops operating cycles
Fig. 15 Mechanical data
Fig. 16 Rated data for latching and unlatching
AWG American Wire Gauge
Fig. 17 Rated data for auxiliary switches
1-pole 3-pole
Mechanical data 3TM 12/13 14/15 32/33 34/35 36
Maximum mechanical switching frequency, without
latching and unlatching
ops/h 600 1 200 600
with latching and unlatching ops/h 60 60 60
Mechanical service life, without latching and unlatching in an ambient temperature range
from -5 °C to +55 °C ops 100 000 1 million
from +55 °C to +70 °C ops 100 000 0.25 million
from -25 °C to -5 °C ops 100 000 0.25 million
Mechanical service life with latching and unlatching ops 100 000 200 000
Mass kg 16 20 to 25
1-pole 3-pole
Latching and unlatching 3TM 12/13 14/15 32/33 34/35 36
Rated release voltage
U
a
(-
3
0 % to +10 %)
V 24 V DC to 32 V DC
V 48 V DC to 60 V DC
V 110 V DC to 125 V DC / 100 V AC to 120 V AC
V 220 V DC to 250 V DC / 230 V AC to 240 V AC
Power loss of the shunt release (VA) 160
Required signal duration (for release signal) ms 100 to 500
1-pole 3-pole
Auxiliary switch 3TM 12/13 14/15 32/33 34/35 36
Protection class on the front side IP 20
Rated insulation level at pollution degree 3 V 500
Rated short-duration power frequency withstand
voltage
U
d
kV
6
Rated operating current
I
e
at rated voltage
U
r
Utilisation category AC 12 for alter-
nating current
AC 24 V A 10
AC 230 V A 10
Utilisation category AC 14 for alter-
nating current
AC 125 V A 6
Utilisation category AC 15 for alter-
nating current
AC 24 V A 6
AC 230 V A 6
AC 400 V A 3
Utilisation category DC 13 for direct
current
DC 24 V A 6
DC 60 V A 2
DC 110 V A 1
DC 220 V A 0.3
Terminal cross-sections of auxiliary switches as per IEC EN 60947-5-1
with flexible flex or wire end ferrule
mm
2
2 x (0.5 to 1.0), 2 x (0.75 to 2.5)
for AWG terminals AWG 2 x (18 to 12)