5
Select the number of Data Bits that matches the configuration of the Siemens device.
Select the number of Stop Bits that matches the configuration of the Siemens device. If
the Baud Rate is greater than 300, the Stop Bits should be set to
1
.
Select the Parity setting that matches the configuration of the Siemens device.
All devices on a single communication port must be configured with the same Baud
Rate, Data Bits, Stop Bits, and Parity.
Click
Defaults
to reset the settings to their default values without saving changes.
Click
Save
to save settings for the selected COM Port. The dialog box will remain
displayed giving you the option to configure additional COM Ports.
Click
Done
to close the dialog box. If the settings have not been saved, the following
dialog box will appear:
Click
Yes
to save settings for the COM Port.
Click
No
to prevent saving the settings.
Click
Cancel
to return to the
Communication Port Settings
dialog box without saving
the settings.
Note
For most of these settings only one setting is allowed. All other possibilities are
disabled.
