Data an
d de
si
gn s
ub
ject to chan
ge wi
thout
noti
ce
©
200
5
Si
em
ens
B
uildin
g Technolo
gies
: Fire
Safet
y and
Se
curi
ty
Pr
oducts
English
Installation and connection of the
dome camera
Package contents
Operation and storage
•
IP-Module CFVA-IP for indoor fix dome
cameras
•
Do not operate or store the unit in
following locations:
1. Connect the video output from the dome
camera to the BNC cable video input (
11
).
•
Fixing template
•
Extremely hot or cold places
2. Connect the electrical supply for the dome
camera to connector socket (
5
).
•
2 fixing screws
•
Close to sources of strong magnetism
•
2 wall plugs
•
Close to sources of powerful
electromagnetic radiation such as radios
or TV transmitters.
3. Remove the dome from the camera body
(illustration
D
).
•
2 mechanical screws
•
Cable cover
4. Place the camera body on the IP-Module
and screw both units together using the
two screws supplied.
•
Software CD
•
In humid or excessively dusty places
•
Quick Start Guide (this document)
•
Where exposed to mechanical vibrations.
•
Close to fluorescent lamps or objects
reflecting light.
IP-Module and fix dome
camera parts
5. Connect the LAN cable to the RJ45
socket (
7
).
•
Under unstable or flickering light sources
6. Connect the (12 V DC / 24 V AC)
electrical supply (
8
).
See figure
A
,
B
and
C
Care and maintenance
•
connector socket (
4
)
The IP-Module CFVA-IP is maintenance-free.
Warning
•
connector socket (
5
)
Small amounts of dirt or dust can be cleaned
from the camera body using a clean soft cloth. If
the unit tends to get very dirty, the dome camera
should be placed within a protective housing.
Ensure correct polarity if using a 12 V DC
supply, as incorrect connection may damage
the dome camera or cause the unit to operate
abnormally.
•
BNC socket (
6
)
•
RJ45 socket (
7
)
•
electrical supply (
8
)
•
BNC cable video input (
11
)
•
BNC cable (
12
)
Technical Data
7. Establish communication with the device
for the first time. See section 6:
Establishing initial communication with the
device.
Important
General
Electrical supply:
12 V DC/24 V AC
This Quick Start Guide is only intended for use
by installers who have an adequate working
knowledge of video systems!
Power requirement:
max. 6.0 W
Operating temperature: -10 – +45 °C, max.
relative humidity 90%
8. A test monitor can be connected to the
BNC socket (
6
) when configuring the
camera.
This guide outlines the most important
information about the indoor fix dome camera. It
is, however, vital that you also refer to the full
User Manual.
Storage temperature:
-20 - +60 °C
Dimensions (H x Ø) :
35.5 x 140 mm
9. Configure the dome camera as required.
Refer to the dome camera manual for set-
up instructions.
Weight: 400
g
Material: Aluminium
Installing the IP-Module
10. Place the dome back on the camera and
screw it in position.
IP-Module fixing
1. Use the drilling template to drill two holes
in the ceiling/wall and insert the wall
plugs.
Note
Clean the dome after installation using a soft,
lint-free cloth to remove dust and greasy
finger marks.
2. Mount the IP-Module to the ceiling/wall.
3. Connect the BNC cable (
12
) to the
connector socket (
4
) in the IP-Module.
