System
unit
Drive carrier is screwed onto the metal stud
1
1
2
3
Undo the two screws (1).
Push the drive carrier in the direction of the arrow (2).
Lift the drive carrier out of the system unit in the direction of the arrow (3).
Drive carrier and metal stud are a single part
Undo the four screws.
A26361-K381-Z129-3-7619
7
System unit
1
2
Lift the drive carrier at the backside of the system unit (1).
Pull the drive carrier out of the system unit in the direction of the arrow (2).
Removing the front cover
You only need to remove the front cover if you wish to install or remove a drive and
the plastic drive covers at the front of the housing are attached by means of
studs (a).
a
8
A26361-K381-Z129-3-7619
