Siemens Nixdorf D931, Technical Manual

Page: 34 / 78

Settings in BIOS Setup
Advanced system settings
24
A26361-D931-Z121-5-7619
No When the PC is started, the Plug&Play functionality ascertains the
current configuration data and uses it to initialize the installed
modules and drives. The configuration data of non-Plug&Play
components is not reset (default entry).
Large Disk Access Mode
specifies the type of hard disk access for large hard disks (more than 1024
cylinders, 16 heads). The default setting depends on the operating system used.
DOS
the operating system uses MS-DOS-compatible hard disk accesses.
Other If the operating system uses hard disk accesses which are not MS-
DOS-compatible (e.g. Novell, SCO Unix).