Siemens Nixdorf D931, Technical Manual

Page: 23 / 78

Main menu - System settings
Settings in BIOS Setup
A26361-D931-Z121-5-7619
13
Quick Boot
can reduce the extent of the self-test and thus accelerate the system startup.
Enabled
When the PC is switched on, the quick self-test is carried out, in
which the floppy disk drives are not checked.
Disabled
When the PC is switched on, the complete PC configuration is
tested (default entry).
Boot Sequence
defines the sequence in which the system BIOS searches the drives for system files
to start the operating system. If you wish to change this sequence, place the cursor
on the entry for the drive you to which wish to move forward ( + key) or back
( - key).
Default entry:
1. Diskette
2. Hard Disk
3. CD ROM
Video Display
This field is used to specify the type of monitor connected.
EGA/VGA
,
Color 80
,
Monochrome
Default entry: EGA/VGA
Base Memory
This field indicates the size of the available base memory below 1 Mbyte.
Extended Memory
This field indicates the size of the memory above 1 Mbyte.