Advanced
Settings in BIOS Setup
ROM areas in the RAM - Shadow Memory
calls the submenu in which you can specify which parts of the ROM (Read Only
Memory) are to be copied to the faster RAM (Random Access Memory) at system
startup.
Phoenix BIOS Setup Copyright 1985-94 Phoenix Technologies Ltd.
Advanced
Shadow Memory Item Specific Help
System Shadow: Enabled
Video Shadow: [Enabled]
Shadow Memory Regions
C800 - CBFF: [Disabled]
CC00 - CFFF: [Disabled]
D000 - D3FF: [Disabled]
D400 - D7FF: [Disabled]
D800 - DBFF: [Disabled]
DC00 - DFFF: [Disabled]
F1 Help
↑↓
Select Item -/+ Change Values F9 Setup Defaults
ESC Exit
←→
Select Menu Enter Execute Command F7 Previous Values
Example for submenu
Shadow Memory
System Shadow
This field is always Enabled, because the System BIOS is automatically copied to
the faster RAM.
Video Shadow
This field allows you to copy the video BIOS to fast RAM. Copying the video BIOS
to fast RAM increases system performance.
Enabled
The video BIOS is copied to fast RAM (default entry).
Disabled
The video BIOS is not copied to fast RAM. This setting is not
effective unless an external monitor controller is used.
A26361-D842-Z120-6-7619
17
Settings in BIOS Setup Advanced
Shadow Memory Regions - ROM areas
Shadow Memory Regions
allows you to copy ROM areas to fast RAM. Copying ROM
areas to fast RAM increases system performance.
Enabled
The ROM area is copied to fast RAM.
Disabled
The ROM area is not copied to fast RAM (default entry).
Peripheral Configuration - Interfaces and controllers
calls the submenu in which you can set the interfaces and controllers.
Phoenix BIOS Setup Copyright 1985-94 Phoenix Technologies Ltd.
Advanced
Peripheral Configuration Item Specific Help
Serial 1: [Auto]
Serial 2: [Auto]
Parallel: [Auto]
Parallel Mode: [Printer]
Diskette Controller: [Enabled]
Hard Disk Controller: [Primary And Secondary]
Mouse Controller: [Enabled]
F1 Help
↑↓
Select Item -/+ Change Values F9 Setup Defaults
ESC Exit
←→
Select Menu Enter Execute Command F7 Previous Values
Example for submenu
Peripheral Configuration
Serial 1 / Serial 2 - Serial interfaces
This field selects the address and the interrupt used to access the relevant serial
interface.
3F8h, IRQ4
;
2F8h, IRQ3
;
3E8h, IRQ4
;
2E8h, IRQ3
;
The serial interface is set to the shown address and interrupt.
Auto
The serial interface is automatically set to the next available
combination (address, interrupt) (Default entry).
Disabled
The serial interface is disabled.
No interrupt is used.
18
A26361-D842-Z120-6-7619
