IV394E Rev. 00
Installation and user manual
Date of issue:
2015-12-11
Pag. 18 di 34 + FR
Fig.2-2I/O terminals connection
3) Connect the UPS output L, N, E to L, N, E of load via a PDU. Tighten the screws
and shelter the terminals
WARNING
έ
Please connect the output Earth well before go for other operation
n
Connection of the UPS communication cables
1) USB cable provided in accessories can be used to connect the UPS with PC
2) Follow
steps below to install SNMP (if purchased )
φ
A. Remove the cover of SNMP slot at UPS rear panel and keep it for further use.
B. Insert the SNMP card and tighten the screws
C. Connect the UPS with internet by network cable.
D. Refer to the SNMP manual provided to do SNMP setting
CAUTION
Terminators are required so as to ensure the connections are firm
Don’t reverse the input L and N
Don’t connect the UPS input to a wall outlet or the outlet will get burnt.
Summary of Contents for Green Point
Page 2: ......
